BajaNomad

Cost on applying stucco

modhatter - 11-23-2006 at 07:12 PM

I have purchased a house in Ensenada and it has a massive high wall surrounding it in ugly grey concrete block. I would like to stucco it and then paint it to make it more attractive.

However I have no clue as to costs for doing this. Is there anyone out there that has contracted this in Mexico. Do they quote it by the square meter and if so do you have any idea what is a fare price. There is quite a bit of it to do.

Bob and Susan - 11-24-2006 at 06:26 AM

putting stucco in a block wall is really easy.

frist you just mix the concrete stucco and spread on the block...easy
this is a scratch coat

then... i would use color coat stucco...
just smooth on

dont use only one coat....you'll see the block when wet

just pay a worker the prevailing wage in your area

paint later if you feel it need to be sealed

shari - 11-24-2006 at 09:43 AM

We are building a house too and here they charge from 40-80 pesos a square meter for a nice smooth job ready to paint. By the way, our 40 pesos guy did way better job than the other 80 peso guy so check around with others to get an idea about the quality of work the person does...what we do is go see other jobs they do and ask the people who hired him. Getting work done is really tricky and each worker seems to have their little "trips", some drink alot, some are into drugs, some want money up front, some don't show up to work....weedy weedy (which means blah blah blah in spanish). Ya have to put up with that and just hope to get a fairly decent one. In my experience some of the "problematic workers do the best work! Hope this sheds some light.

comitan - 11-24-2006 at 11:41 AM

I don't see where any figures in other locations would help someone in Ensenada. Shari good advise otherwise for all of Mexico.

bugdude - 11-24-2006 at 06:43 PM

Depending on how old the stucco wall is I suggest applying a plaster weld/bonder (available at HD in the building materials section) prior to any plasterering. Take a water hose to the walls to remove any build up of dirt, dust, etc. that will prevent a good bond prior to any work as well. Older concrete and/or brick facades that are plastered with cement or stucco are notorious for "popping" loose after a few years. Use an "expansion joint" (also available at HD) every ten feet or so to control structural/stress cracks.

I worked as journeyman plasterer in commercial construction company while in college. Couldn't pass up the opportunity to put in my two cents.

Mod

bajaguy - 11-24-2006 at 08:46 PM

Check your u2u