BajaNomad

i need a pool boy....

Bob and Susan - 2-13-2008 at 11:12 AM

we need a pool tech to start our new pool heater
its a pentair MasterTemp 300k btu

we may need a part as the heater sits 3 feet below the deck

we'll give you a free week stay in a casita with breakfast

anyone do pool stuff???:?::?:

vandenberg - 2-13-2008 at 11:21 AM

Quote:




anyone do pool stuff???:?::?:


Is that the thingy with the water in it.:?::biggrin:

vandenberg - 2-13-2008 at 12:04 PM

Quote:
Originally posted by lencho
Quote:
Originally posted by Bob and Susan
anyone do pool stuff???:?::?:
My buddy Leroy knows a lot about that stuff...

--Larry


See what I mean.:?::?:
Confusing.:biggrin:

Bob and Susan - 2-13-2008 at 12:25 PM

interesting...

we have a builtin pool...

any pool techs available????

kimberlee - 2-13-2008 at 01:13 PM

you need a "pool boy" ????? :lol:

sorry but **** I'm sure there are Mexicano pool techs but you may wanna adjust your wording a bit :light:

[Edited on 2-13-2008 by Hose A]

Sharksbaja - 2-13-2008 at 01:42 PM

Chico de alberca?

DirkEXC - 2-13-2008 at 01:59 PM

I did this with our new pool a few month ago. Make sure you have bleed all the lines of any air and your water pressure is between 10 & 15 lbs, set the temp you want and there should be a green button on it to start. The directions on mine were very good. If this does not work what exact problem are you having. Hopefully you are hearing the clicking sound as the automatic pilot truy to light the furnace.

are you even getting the clicking sound ?

capt. mike - 2-13-2008 at 02:11 PM

Bob ck your yoooz to yooooz.

U2U

djh - 2-13-2008 at 03:33 PM

Hey Bob,
I sent you a U2U suggestion too.
djh

Bob and Susan - 2-13-2008 at 04:07 PM

no clicking at all

the water has been going thru for a few months i just never had it "hooked up"

i'll only need it a month

today it was 85 degrees and the pool was 62 degrees

this summer i'll ONLY need ICE:lol:

Bob and Susan - 2-13-2008 at 05:52 PM

its 3 to 6 feet ~16,000 gallons

ALL pools need a heater IMHO:light:

the shallow pools actually lose heat easier than the deeper units overnite

capt. mike - 2-14-2008 at 07:23 AM

Bob - no clicking means the piezo elec igniter is not getting juice. check the elec connection to the control solonoid and V converter.
and bleed the gas line.

Bob, Mike says if your heater is lower than your pool

Keri - 2-14-2008 at 08:16 AM

you need a check valve on the outward side of the heater. elsewise the water comes in from both directions. We have had to replace ours twice as ours is below our pool. We use Calderas California in Ensenada His number is 646-177-1327, His name is Alberto. He may know someone in Loreto or Constitution that can help. Good Luck, Mike and Keri:yes: