BajaNomad
Not logged in [Login - Register]

Go To Bottom
Printable Version  
 Pages:  1  2
Author: Subject: One more AGM ? UPDATE and Controller issue?
woody with a view
PITA Nomad
*******




Posts: 15939
Registered: 11-8-2004
Location: Looking at the Coronado Islands
Member Is Offline

Mood: Everchangin'

[*] posted on 5-30-2018 at 10:59 AM


My guess is your panels are not putting enuf juice into the bank. Ad two more and you’ll be happi(er). I’m having the same issue. Need more panels.



View user's profile
ncampion
Super Nomad
****




Posts: 1238
Registered: 4-15-2006
Location: Loreto
Member Is Offline

Mood: Retired and Loving it

[*] posted on 5-30-2018 at 12:07 PM


Calculating for 10 - 15% loss from the panels, as Larry said you should be putting out around 20 amps (14.5v) by midday. The Xantrex C60 is not an MPPT controller so it is important that the panel voltage output is appropriate to the battery bank voltage. Check that the panels are wired correctly (parallel if Pmax is around 17 v.) the controller will "down size both the voltage and amperage to match your settings so you may not realize the full 20 amps however it should not be anywhere what you are seeing. I suspect the controller is OK, just need to be sure everything is wired correctly. If you're in BoLa you might have Larry take a look. Sorry Larry, don't mean to volunteer you services but I know you know what you're doing.



Living Large in Loreto. Off-grid and happy.
View user's profile
willardguy
Elite Nomad
******




Posts: 6451
Registered: 9-19-2009
Member Is Offline


[*] posted on 5-30-2018 at 12:28 PM


ugh, with only a very small load your new battery bank fell from 100% (12.7) to 50% (12.4).....does the tri-metric attest to these voltages (or close)? solid green light on the controller would show it in float, double check bulk settings. good luck!

[Edited on 5-30-2018 by willardguy]
View user's profile
Santiago
Ultra Nomad
*****




Posts: 3512
Registered: 8-27-2003
Member Is Offline


[*] posted on 5-31-2018 at 05:56 AM


I had to re-set the Tri-Metric and according to their web-site, it can take a couple of charging cycles before it starts to accurately report the "% Charge". It is accurately reporting the voltage, I think. I got as high as 18 amps going into the bank mid-afternoon so I think I got that part worked out.
Initially, my bank was only 220 AH so the two 195 watt panels were fine, but a few years ago I added another 220 AH but never any more panels. On most trips, the system would go to float by late afternoon so I figured I was still OK. LarryC stopped by (thanks) and recommended a couple more so will do that next trip.
View user's profile
 Pages:  1  2

  Go To Top

 






All Content Copyright 1997- Q87 International; All Rights Reserved.
Powered by XMB; XMB Forum Software © 2001-2014 The XMB Group






"If it were lush and rich, one could understand the pull, but it is fierce and hostile and sullen. The stone mountains pile up to the sky and there is little fresh water. But we know we must go back if we live, and we don't know why." - Steinbeck, Log from the Sea of Cortez

 

"People don't care how much you know, until they know how much you care." - Theodore Roosevelt

 

"You can easily judge the character of others by how they treat those who they think can do nothing for them or to them." - Malcolm Forbes

 

"Let others lead small lives, but not you. Let others argue over small things, but not you. Let others cry over small hurts, but not you. Let others leave their future in someone else's hands, but not you." - Jim Rohn

 

"The best way to get the right answer on the internet is not to ask a question; it's to post the wrong answer." - Cunningham's Law







Thank you to Baja Bound Mexico Insurance Services for your long-term support of the BajaNomad.com Forums site.







Emergency Baja Contacts Include:

Desert Hawks; El Rosario-based ambulance transport; Emergency #: (616) 103-0262