| Pages:
1
2
3 |
John Harper
Super Nomad
Posts: 2289
Registered: 3-9-2017
Location: SoCal
Member Is Offline
|
|
Quote: Originally posted by eastmeetswest  | | In British Columbia, fir is accepted as a much stronger wood structurally. Cedar tends to lack much structural strength and tends to wear easier. If
you use redwood make sure that it is dried to avoid shrinkage and checking. The fir that you have will be well air dried. |
I have no reason to use redwood. It's just the only wood I asked about and then found out I could get it milled. I guess I need to ask if they can
mill Doug fir. Like I said, I'm just doing some hard research. I'm not dead set on any particular wood (except the $400 each treads, that's a deal
killer) and I have no issues with stained and sealed wood of any kind.
I just recall redwood looking good on outside decks and fences, so I figured it might work. I'm an auto and motorcycle guy, not a carpenter,
although I do know how to use almost all hand power tools, welders, and auto shop equipment.
I think the existing treads are just going to look goofy being so thin. Having thicker stairs will approximate the thickness of the carpet wrap.
I'm even thinking 2.5" or 2.75" rather than 3" but I need to do some more examination of thicknesses, as the carpet is severely worn in the center.
Thank you so much for your perspective, I wondered about using relatively inexpensive Douglas fir, but my first voyage was to a redwood place.
John
|
|
|
mtgoat666
Select Nomad
Posts: 18385
Registered: 9-16-2006
Location: San Diego
Member Is Offline
Mood: Hot n spicy
|
|
If worried about slipping, maybe use teak for tread area, with oil finish.
Woke!
“...ask not what your country can do for you – ask what you can do for your country.” “My fellow citizens of the world: ask not what America
will do for you, but what together we can do for the freedom of man.”
Prefered gender pronoun: the royal we
|
|
|
motoged
Elite Nomad
Posts: 6481
Registered: 7-31-2006
Location: Kamloops, BC
Member Is Offline
Mood: Gettin' Better
|
|
| Quote: Originally posted by advrider | | The Redwood will hold up just fine for your life time and probably the next owner. A good finish will protect them and can be reapplied if needed.
|
I fully agree. Op's first idea was redwood....stick with it and its patina later will warm your heart.
Some years ago (1975) I stayed in Westport, California at a two story hotel called Cobweb Palace: several rooms upstairs and bar downstairs. The bar
was an original from late 1800's and was made from redwood.....lovely bartop profiles worn in by elbows over the years.
Don't believe everything you think....
|
|
|
John Harper
Super Nomad
Posts: 2289
Registered: 3-9-2017
Location: SoCal
Member Is Offline
|
|
I'm going to check out the suggestion about Douglas fir, before I make any firm decisions. I'm really stoked I posted this up, because I've learned
a lot more than I expected. That's always good. Thanks to all.
As a despicable, lowlife, taxpayer burdening, high school teacher, I don't get paid until the end of the month, so plenty of time for more
information.
advrider's comment did warm my heart. And motoged's added comments.
John
[Edited on 9-9-2021 by John Harper]
|
|
|
advrider
Super Nomad
Posts: 1863
Registered: 10-2-2015
Member Is Offline
|
|
Another option is bug killed pine, I've been using it on projects and it has a blue tint and cool look. It's a soft wood but there is a lot of it out
there. Several small mills in my Northern California area if your looking for prices?
|
|
|
John Harper
Super Nomad
Posts: 2289
Registered: 3-9-2017
Location: SoCal
Member Is Offline
|
|
I think your idea about the grip strips is excellent.
John
|
|
|
John Harper
Super Nomad
Posts: 2289
Registered: 3-9-2017
Location: SoCal
Member Is Offline
|
|
Update 9/12/21
Got carpet off one tread and the mid landings to see what we're dealing with. We decided to go with fake wood tile on mid landings and use it as well
for the upstairs landing/hallway and one of the bathrooms. Also looks like the existing tread is 1.5" Douglas fir. With carpet tack strip, padding
and carpet adds another 1/2" so I'm thinking get the Douglas fir milled to 2" now.
Also have the idea to integrate some Mexican tiles into the vertical faces of the landings.
Looks like 150 sq ft of wood tiling strips and 33 feet of milled lumber, plus all the supplies needed to install and we'll have a plan ready to
execute.
John
|
|
|
John Harper
Super Nomad
Posts: 2289
Registered: 3-9-2017
Location: SoCal
Member Is Offline
|
|
Tile bought, delivered, and stacked upstairs. Wood ordered for stairs. Going to look at Mexican tiles on Saturday. Buddy at the house this week
laying the tile while I'm at school. Stair treads will be the last thing we do, most likely, as they will take some precision cutting.
John
|
|
|
advrider
Super Nomad
Posts: 1863
Registered: 10-2-2015
Member Is Offline
|
|
Pictures when its done would be cool.
|
|
|
thebajarunner
Ultra Nomad
Posts: 3718
Registered: 9-8-2003
Location: Arizona....."Free at last from crumbling Cali
Member Is Offline
Mood: muy amable
|
|
Trex...
Sorry I am chiming in late
Just moved to Arizona since I knew Newsom would prevail
Love that 2.5% maximum state income tax and the $3 gas
We had Trex for our very large wraparound porch in Central California, also the steps. It comes with a fake would grain that is not slick.
And it will never rot or get soft.
|
|
|
John Harper
Super Nomad
Posts: 2289
Registered: 3-9-2017
Location: SoCal
Member Is Offline
|
|
Absolutely! Thanks to all for their advice.
John
|
|
|
John Harper
Super Nomad
Posts: 2289
Registered: 3-9-2017
Location: SoCal
Member Is Offline
|
|
Okay, tile almost done, here's the first landing with colored tiles.
I figured I'd do all the tile, baseboards, and paint. We can pull each tread individually at leisure. I think the hardest parts almost done.
John
|
|
|
advrider
Super Nomad
Posts: 1863
Registered: 10-2-2015
Member Is Offline
|
|
Good choice, looks good.
|
|
|
AKgringo
Elite Nomad
Posts: 6027
Registered: 9-20-2014
Location: Anchorage, AK (no mas!)
Member Is Offline
Mood: Retireded
|
|
| Quote: Originally posted by AKgringo |
If you want to make a real, manly project out of those stair treads, I have a standing, recently bug killed Douglas fir tree that you can carve into
boards! How hard could that be, and I am only about five hundred miles north of you! |
In an ironic turn of events, I wound up cutting that fir tree, and one other into 8' 3" logs which a neighbor milled into 2 1/2" x 12" planks. The
color, and grain came out very good.
My nephew is going to re-deck a flat bed equipment trailer with them, and I will ask him to take pictures of the completed project.
[Edited on 3-8-2022 by AKgringo]
If you are not living on the edge, you are taking up too much space!
"Could do better if he tried!" Report card comments from most of my grade school teachers. Sadly, still true!
|
|
|
surfhat
Senior Nomad
Posts: 545
Registered: 6-4-2012
Member Is Offline
|
|
Straight grain knot-free Douglas fir is a fine hardwood.
I made some exterior doors out of it years ago adnnthey were beautiful. Just check the prices. haha
It compares price wise with other hardwoods like oak and cherry and mahogany. Alder when stained can look like mahogany and is quite reasonable per
board foot.
Redwood can be a bit soft with out a durable finish but it is a looker when finished.
It sounds like you went to J and J's Lumber in Sorrento Valley. They are a quality supplier. Thanks for keeping us abreast of how your project is
coming along, neighbor John. [Leucadia]
|
|
|
surfhat
Senior Nomad
Posts: 545
Registered: 6-4-2012
Member Is Offline
|
|
Straight grained knot-free fir is at least as hard as mahogany and mahogany doesn't have a problem with being called a hardwood.
Of course, fir that is not straight grained with knots is softer. It is all in how the fir is milled and choosing the best boards. Straight grained
fir's prices reflect the quality of fir and there are several cheaper cuts of fir that are softer.
|
|
|
| Pages:
1
2
3 |
![[*]](images/xmbforum/default_icon.gif){kind=icon}
