BajaNomad
Not logged in [Login - Register]

Go To Bottom
Printable Version  
 Pages:  1  
Author: Subject: A question for Hummer I (and other straightfoward rig) owners who work on them yourselves.
Packoderm
Super Nomad
****


Avatar


Posts: 2116
Registered: 11-7-2002
Member Is Offline


[*] posted on 5-26-2005 at 08:36 PM
A question for Hummer I (and other straightfoward rig) owners who work on them yourselves.


I am aware that the armed forces use Hummers. I'm also pretty sure that they have diesels in them. As for the civilian Hummer, are they straight forward to service and repair, or is there such stupidity as having to remove the timing belt in order to replace a water pump? I've been working on my wife's Geo Tracker, and although I am of modest means, it just might be worthwhile to shell out the $125,000 or whatever Hummers cost if they are more substantial and less disposable than my wife's Bic lighter of a Tracker. I guess this is a rant. The engineering and attention to detail is atrocious on the '96 Tracker.

Maybe for non Hummer owners, I'd like to hear your stories regarding how serviceable your rig is. My '92 Ford Ranger is pretty straight forward (I think I can do just about anything on it except the transmission, the rear end, and some of the fuel injection), and my '78 VW bus seems to be a 50/50 mix of ingenuity and engineering weirdness. I'm waiting for it the bus to be 30 years old to where I don't have to worry about smog, then I plan to replace the fuel injection with a Scat single carburator kit.
View user's profile
Barry A.
Select Nomad
*******




Posts: 10007
Registered: 11-30-2003
Location: Redding, Northern CA
Member Is Offline

Mood: optimistic

[*] posted on 5-26-2005 at 08:45 PM
Packo------


My advice, for what it is worth, stick with your old time vehicles. I do not have a clue what is going on under the hood of these newer computer operated vehicles, and it scares the blazes out of me. I can fix my old Baja Bug, and old '69 Ford truck, with no problems, but not these new ones.

By the way, I think the civilian type "military Hummer" is about $85K, and the H2 Hummer about $55K. Personally, I would rather have a "Jeep Rubicon extended" than a Hummer. Hummers are just too big.
View user's profile
Dave
Elite Nomad
******




Posts: 6005
Registered: 11-5-2002
Member Is Offline


[*] posted on 5-26-2005 at 08:48 PM


Quote:
Originally posted by Packoderm
I plan to replace the fuel injection with a Scat single carburator kit.


Why? I assume it's a 2.0 ltr. You won't be gaining anything except carburation which you will have to pay for. FI is "a good thing".




View user's profile
Ken Bondy
Ultra Nomad
*****


Avatar


Posts: 3326
Registered: 12-13-2002
Member Is Offline

Mood: Mellow

[*] posted on 5-26-2005 at 08:53 PM


Packoderm I have put about 80,000 miles on my 1996 H1 (6.5L turbo diesel). Mechanically it has been great, very little service required. I have done all the oil and filter changes myself and can reliably report they are easy to do (the 16" ground clearance helps a lot). Never having needed any other repairs I can't report firsthand, although the clearances and access to everything in the engine compartment looks pretty generous.

++Ken++

PS Barry A I don't think you can touch a new H1 for less than $110K now.

[Edited on 5-27-2005 by Ken Bondy]

[Edited on 5-27-2005 by Ken Bondy]
View user's profile Visit user's homepage
Packoderm
Super Nomad
****


Avatar


Posts: 2116
Registered: 11-7-2002
Member Is Offline


[*] posted on 5-26-2005 at 09:22 PM


Dave, I just feel that I may get stranded somewhere in Baja if my fuel inj. goes wacky. I do carry a spare for every fuel injection part including an extra "brain." I have also considered buying the Scat carb kit and just carrying it with me when I'm in the hinterlands. I guess I could do that now; all I need is the $275.00 to pay for it.

And Barry, I plan on doing exactly what you are suggesting. On my next trip south, I'd like to find a place, maybe in Mexicali, where I can get a heavy duty, full length roof rack for my bus.

Ken, I've been reading about your H1 for some time. That was you who had a battery terminal go though your fiberglass hood wasn't it? If I remember correctly, you were a good sport about it.:yes:

I really would like to hear some stories about those who work on and customize their own rigs. That is my favorite subject on the Baja sites. I sometimes lurk about Baja.net for just that kind of thing. Maybe I'll try to start a stronger thread on that subject.
View user's profile
Dave
Elite Nomad
******




Posts: 6005
Registered: 11-5-2002
Member Is Offline


[*] posted on 5-26-2005 at 09:34 PM


Quote:
Originally posted by Packoderm
I really would like to hear some stories about those who work on and customize their own rigs. That is my favorite subject on the Baja sites. I sometimes lurk about Baja.net for just that kind of thing. Maybe I'll try to start a stronger thread on that subject.


I'm just starting a major project involving my '79 bay camper. A complete renovation with some minor mods for Baja. Everything comes apart, the body gets refinished and engine rebuilt. New custom interior also.

Hope I live long enough to see it through.:lol:




View user's profile
Ken Bondy
Ultra Nomad
*****


Avatar


Posts: 3326
Registered: 12-13-2002
Member Is Offline

Mood: Mellow

[*] posted on 5-26-2005 at 09:38 PM


Oooops Packoderm I forgot to mention that ;D;D;D. That was indeed me. Add a battery change with a terminal punching through the hood to my list of owner-accomplished repairs :tumble::tumble: I was trying to forget that.
++Ken++
View user's profile Visit user's homepage
Packoderm
Super Nomad
****


Avatar


Posts: 2116
Registered: 11-7-2002
Member Is Offline


[*] posted on 5-26-2005 at 09:38 PM


Dave, any photos?

Or was that the Dodge Diesel I saw months ago?

[Edited on 07/17/2004 by Packoderm]
View user's profile
Dave
Elite Nomad
******




Posts: 6005
Registered: 11-5-2002
Member Is Offline


[*] posted on 5-26-2005 at 09:45 PM


I'll see if I can find any "befores". I doubt that you'll want to see a bunch of bus parts lying around on the garage floor.

Still looking for a top notch machine shop in either TJ or Ensenada.




View user's profile
bufeo
Senior Nomad
***




Posts: 793
Registered: 11-16-2003
Location: Santa Fe New Mexico
Member Is Offline


[*] posted on 5-26-2005 at 10:33 PM


Quote:

PS Barry A I don't think you can touch a new H1 for less than $110K now.


They're around--and definitely available for >100 grand. In fact, there's a new one on ebay right now for under $65K.

I was looking for one a few months ago and had three new ones ranging in price from $54K to $78K.

After driving one I decided that its dimensions were just out of whack for the backroads we like to travel. I liked the vehicle in so many ways (the three I had narrowed the search to were all diesels) that it was difficult for me to discard it as a choice.

In the end, though, it was the low towing capacity that turned me off. I felt that there was not enough torque to work with.

I'm still infatuated with the H1 (don't care for the H2 or the Jeep Cherokee lookalike successor), but it probably won't make it into our stable.




View user's profile
Sharksbaja
Elite Nomad
******


Avatar


Posts: 5814
Registered: 9-7-2004
Location: Newport, Mulege B.C.S.
Member Is Offline


[*] posted on 5-27-2005 at 01:19 AM


yes I like the H1 but the new ones are hurtin' (wheres the clearance?) My wifes bro has two....one for parts :bounce: Their dirt-bike children want a pick-up like mine. Say "not enough room"
View user's profile
bufeo
Senior Nomad
***




Posts: 793
Registered: 11-16-2003
Location: Santa Fe New Mexico
Member Is Offline


[*] posted on 5-27-2005 at 08:29 AM


Quote:
Originally posted by whistler
The Hummer's towing capacity is lower than a lot of 1 ton trucks but it's not because of low torque... .


You're correct, whistler, I was careless in my "cut and paste".

Here's the original sentence I had meant to post:

"In the end, though, it was the low towing capacity that turned me off. I felt that there was not enough difference between the max. towing capacity and the wt. of our off-road trailer. It's puzzling though 'cause there's plenty of torque to work with."

I had originally posted that on another web site and did a sloppy job of copying it to this one.

Since Hummer offers a heavier duty hitch for towing (up to 7000 lbs, I think) you'd thing they'd put together something that would move the max up to 10K or thereabouts, but I'm no engineer.




View user's profile
jrbaja
Ultra Nomad
*****




Posts: 4863
Registered: 2-2-2003
Member Is Offline


[*] posted on 5-27-2005 at 09:12 AM
Hey Pack


don't forget about the bamboo rack idea. You could be the first with a VW bus.
View user's profile
Packoderm
Super Nomad
****


Avatar


Posts: 2116
Registered: 11-7-2002
Member Is Offline


[*] posted on 5-27-2005 at 09:48 AM


Jr, I tried to talk my wife into the bamboo rack, but she didn't want to go for it. It would be cool looking though. I think I'm going to try to go for a heavy duty metal one.
View user's profile
El Camote
Senior Nomad
***




Posts: 514
Registered: 9-7-2003
Location: Above the clouds
Member Is Offline

Mood: y Blues

[*] posted on 5-27-2005 at 09:58 AM


Quote:
Originally posted by Dave
Quote:
Originally posted by Packoderm
I plan to replace the fuel injection with a Scat single carburator kit.


Why? I assume it's a 2.0 ltr. You won't be gaining anything except carburation which you will have to pay for. FI is "a good thing".


Hope there was a lot of improvement in VW's F.I. system in 10 years. I had a '69 Squareback in college and the F.I. system was constantly a problem. Leaking injectors, loose temp sensor which made the engine run like sh*t and suck gas. When it ran right I got incredible mileage, like 37 mpg. but that was very rare. Switched to the dual carb set-up and never had another problem. Dave, I'd think seriously about the switch!
View user's profile
Ken Bondy
Ultra Nomad
*****


Avatar


Posts: 3326
Registered: 12-13-2002
Member Is Offline

Mood: Mellow

[*] posted on 5-27-2005 at 10:20 AM


bufeo - obviously I'm looking in the wrong place. All the sticker prices I've seen on new ones in dealerships are over $100K. I wasn't aware you could buy a new one on ebay.
++Ken++
View user's profile Visit user's homepage
Dave
Elite Nomad
******




Posts: 6005
Registered: 11-5-2002
Member Is Offline


[*] posted on 5-27-2005 at 10:58 AM


Quote:
Originally posted by El Camote
Hope there was a lot of improvement in VW's F.I. system in 10 years. I had a '69 Squareback in college and the F.I. system was constantly a problem. Leaking injectors, loose temp sensor which made the engine run like sh*t and suck gas. When it ran right I got incredible mileage, like 37 mpg. but that was very rare. Switched to the dual carb set-up and never had another problem. Dave, I'd think seriously about the switch!


When they came out with the 2.0 ltr they got the FI right. I've never had a problem with it even the four years I drove it on Mexican gas. Most convert to carburation because they understand it, can fix it and are afraid that a Mexican mechanic doesn't or can't. IMO, it's much easier to learn FI then go to the expense of switching. And FI is way more efficient, cheaper too.




View user's profile
bufeo
Senior Nomad
***




Posts: 793
Registered: 11-16-2003
Location: Santa Fe New Mexico
Member Is Offline


[*] posted on 5-27-2005 at 11:19 AM


++ken++

I just did a very quick search on ebay and found several '06s with miles ranging from 37 to 122 and bids from $31K+ to $85K+. I think each said "Reserve Not Met" but I learned last year that these so-called reserves are negotiable. and one dealer (in NV) offered to deliver the H1 I was interested in to our house in CA (near Santa Barbara) for no charge. At that time the price on that one (a new '05), fully loaded w/manual xmission, was $56K.

I don't know particulars but apparently the H1s have not enjoyed the popularity that GM had hoped for and dealers are negotiating prices aggressively.

[Edited on 5-27-2005 by bufeo]




View user's profile
Sharksbaja
Elite Nomad
******


Avatar


Posts: 5814
Registered: 9-7-2004
Location: Newport, Mulege B.C.S.
Member Is Offline


[*] posted on 5-27-2005 at 11:44 AM


Quote:
Originally posted by bufeo
I think each said "Reserve Not Met" but I learned last year that these so-called reserves are negotiable.


Really, how would one do that!
View user's profile
Ken Bondy
Ultra Nomad
*****


Avatar


Posts: 3326
Registered: 12-13-2002
Member Is Offline

Mood: Mellow

[*] posted on 5-27-2005 at 12:00 PM


Thanks bufeo, good info for me. I understand only about 9000 H1s have sold in the US. You have to be crazy to own one, I am a good example of that. But I sure love mine and will never get rid of it. OTOH at those prices for a new 05 I might get another one :lol:
++Ken++

[Edited on 5-27-2005 by Ken Bondy]
View user's profile Visit user's homepage
 Pages:  1  

  Go To Top

 






All Content Copyright 1997- Q87 International; All Rights Reserved.
Powered by XMB; XMB Forum Software © 2001-2014 The XMB Group






"If it were lush and rich, one could understand the pull, but it is fierce and hostile and sullen. The stone mountains pile up to the sky and there is little fresh water. But we know we must go back if we live, and we don't know why." - Steinbeck, Log from the Sea of Cortez

 

"People don't care how much you know, until they know how much you care." - Theodore Roosevelt

 

"You can easily judge the character of others by how they treat those who they think can do nothing for them or to them." - Malcolm Forbes

 

"Let others lead small lives, but not you. Let others argue over small things, but not you. Let others cry over small hurts, but not you. Let others leave their future in someone else's hands, but not you." - Jim Rohn

 

"The best way to get the right answer on the internet is not to ask a question; it's to post the wrong answer." - Cunningham's Law







Thank you to Baja Bound Mexico Insurance Services for your long-term support of the BajaNomad.com Forums site.







Emergency Baja Contacts Include:

Desert Hawks; El Rosario-based ambulance transport; Emergency #: (616) 103-0262