Bob and jane
Nomad
Posts: 272
Registered: 3-25-2004
Member Is Offline
|
|
dodge diesel problems-Ideas?
On the trip down, the truck ran great until north of G.N.. The last 300 miles to loreto, whenever i punched it, it shut down, motor wouldn't quit, but
just idled, foot off the gas and again accelerated normally, and the truck ran fine. Just no gas when punched. I changed the filter, and, no change.
Replaced the fuel pump-same. Computer code indicated the temp- coolant sensor reading overheating, engine shutting down. replaced that. Mi mechanico,
is of mind that it is the injector pump. He's probably right, but wondering if anyone has other ideas before i go there. Thanks, Bob
|
|
|
Kingfish
Newbie
Posts: 1
Registered: 10-21-2002
Location: Capistrano Beach, Ca. 92624
Member Is Offline
|
|
Bob, if you have a VP44 pump, it's going out! That's exactly what my 1998.5 did when it went out. Do you have a fuel pressure gage? Are you using the
stock life pump? Good luck
|
|
|
Bob and Susan
Elite Nomad
Posts: 8813
Registered: 8-20-2003
Location: Mulege BCS on the BAY
Member Is Offline
Mood: Full Time Residents
|
|
its the "lift pump"
its expensive too...common on dodges i hear
mine went out right by the border in TJ ...the WORST part of town YUK
warranty repair thank god
edit:link http://www.cumminsforum.com/forum/98-5-02-repairs-replacemen...
[Edited on 10-12-2012 by Bob and Susan]
|
|
|
Bob and jane
Nomad
Posts: 272
Registered: 3-25-2004
Member Is Offline
|
|
dodge truck
The truck is a1998 24valve 5.9, 6 cylinder
|
|
|
Bob and jane
Nomad
Posts: 272
Registered: 3-25-2004
Member Is Offline
|
|
When the fuel pump was replaced, i believe that included, or was the lift pump. Am i correct in this assumption?
|
|
|
Bob and jane
Nomad
Posts: 272
Registered: 3-25-2004
Member Is Offline
|
|
One more question. Is there a filter in the gas tank?
|
|
|
Bob and Susan
Elite Nomad
Posts: 8813
Registered: 8-20-2003
Location: Mulege BCS on the BAY
Member Is Offline
Mood: Full Time Residents
|
|
there's 2 fuel pumps
did you replace both??
|
|
|
Bob and jane
Nomad
Posts: 272
Registered: 3-25-2004
Member Is Offline
|
|
Bob, I've only replaced one fuel pump. Whistler, it always happens when i punch it after it is warm. That's what led me to replace the sensor, before
i went for replacing the injector pump. My mechanico has a place in la paz that reconstructs them for 4-5000 pesos. he'll remove it and send it by
bus. Seems that is my next move. Que piensa?
|
|
|
monoloco
Elite Nomad
Posts: 6667
Registered: 7-13-2009
Location: Pescadero BCS
Member Is Offline
|
|
There is an authorized Cummins dealer in La Paz, I have also had very good service from Servicio Diesel Arranas.
|
|
|
vgabndo
Ultra Nomad
Posts: 3461
Registered: 12-8-2003
Location: Mt. Shasta, CA
Member Is Offline
Mood: Checking-off my bucket list.
|
|
This is an odd call, but check the electronic device that sits at the end of the throttle cable. It turns mechanical energy into a computer signal for
the engine controller. When the engine drops to an idle, try shifting into neutral and back to drive. When mine failed on my '01 1/2, it would respond
to the throttle again after the gear shift change and a couple of taps on the accelerator.
When I went looking for it, I also found that my throttle cable was 90% to the breaking point!!! (170k)
http://www.genosgarage.com/prodinfo.asp?number=TPS98502
About $160.00 is the going rate.
In your truck you should be able to turn the ignition switch on and off two times without hitting the starter, and get error codes to read on your
odometer. If 0216, it is the IP, or LP or Both.
Good luck.
Wait until the fuel starts running back into the tank every time you park up hill! The valve cover has to be removed to even SEE the places where the
O-rings and banjo bolts have to be made AIR tight, not just diesel tight!!! I love a Cummins, sometimes I'd like to get my felonious hands around the
throat of one of the.....oh never mind.
[Edited on 10-13-2012 by vgabndo]
Undoubtedly, there are people who cannot afford to give the anchor of sanity even the slightest tug. Sam Harris
"The situation is far too dire for pessimism."
Bill Kauth
Carl Sagan said, "We are a way for the cosmos to know itself."
PEACE, LOVE AND FISH TACOS
|
|
|
Bob and Susan
Elite Nomad
Posts: 8813
Registered: 8-20-2003
Location: Mulege BCS on the BAY
Member Is Offline
Mood: Full Time Residents
|
|
my advice...tow the thing to a dealer north of the border...forget local dealers
maybe check with your insurance to see if the tow is covered
you could replace everything and STILL have a problem...better to KNOW!!!
|
|
|
wessongroup
Platinum Nomad
Posts: 21152
Registered: 8-9-2009
Location: Mission Viejo
Member Is Offline
Mood: Suicide Hot line ... please hold
|
|
Or, don't "punch it" till ya get back ... just saying
|
|
|
monoloco
Elite Nomad
Posts: 6667
Registered: 7-13-2009
Location: Pescadero BCS
Member Is Offline
|
|
| Quote: | Originally posted by Bob and Susan
my advice...tow the thing to a dealer north of the border...forget local dealers
maybe check with your insurance to see if the tow is covered
you could replace everything and STILL have a problem...better to KNOW!!! |
That would be stupid seeing as
how there is a Cummins dealer with factory trained technicos in La Paz. Working on a 24 valve Cummins is not rocket science.
|
|
|
Bob and jane
Nomad
Posts: 272
Registered: 3-25-2004
Member Is Offline
|
|
Thanks for all the input. Towing north from loreto won't be an option. We're not returning north till july, plan on a trip to the mainland jan and
feb. I love the mechanicos in mexico, they fix things or make do. My favorite was about 1989, we were about to camp on the north end of mag bay, and
the fuel pump on our old suburban went kaput, one was found in posa grande, a guy brought it out and installed it. we were stuck on a dirt road
leading to the water and an old-old citron comes buy with a gas can on top with a hose to the motor. That's all you need for a fuel pump. What a hoot,
take a deep breath and just deal with it. My wife and young sons got a kick out of it. I'm probably going with the repair of the injector pump.
Appreciate all the ideas. Bob
[Edited on 10-13-2012 by Bob and jane]
|
|
|
Bob and Susan
Elite Nomad
Posts: 8813
Registered: 8-20-2003
Location: Mulege BCS on the BAY
Member Is Offline
Mood: Full Time Residents
|
|
| Quote: | | Originally posted by monolocoThat would be stupid seeing as how there is a Cummins dealer with factory trained technicos in La Paz. Working
on a 24 valve Cummins is not rocket science. |
opps...i didnt know they were "factory trained"
so...do they send them to the cummins factory in the usa to get trained???
i dont think so...
loreto is 14 hours south of the san diego dealer with a professional staff and PARTS on the shelf or an hour away
one day up
one day to fix
one day back
a three day fix...with a guarantee
lots of flatbeds go north daily empty and the drivers take CASH...sometimes less than gas....afterall this is mexico
i hope its the injector pump..and fixed
still... could be just a a little electric part
you never know when those are dead
|
|
|
unbob
Nomad
Posts: 407
Registered: 8-7-2006
Member Is Offline
|
|
This is the absolute best forum I know of re Dodge Ram diesel trucks. Highly recommend you check it out. Oh, and good luck!
http://www.dieseltruckresource.com/dev/index.php
"I'm too young to be this old!"
|
|
|
monoloco
Elite Nomad
Posts: 6667
Registered: 7-13-2009
Location: Pescadero BCS
Member Is Offline
|
|
| Quote: | Originally posted by Bob and Susan
| Quote: | | Originally posted by monolocoThat would be stupid seeing as how there is a Cummins dealer with factory trained technicos in La Paz. Working
on a 24 valve Cummins is not rocket science. |
opps...i didnt know they were "factory trained"
so...do they send them to the cummins factory in the usa to get trained???
i dont think so...
loreto is 14 hours south of the san diego dealer with a professional staff and PARTS on the shelf or an hour away
one day up
one day to fix
one day back
a three day fix...with a guarantee
lots of flatbeds go north daily empty and the drivers take CASH...sometimes less than gas....afterall this is mexico
i hope its the injector pump..and fixed
still... could be just a a little electric part
you never know when those are dead |
I'd hate to see the ticket on that one. Why do you think the only
mechanics that understand diesels must be trained in the US? Cummins is an international company. There are plenty of Cummins diesels in La Paz, they
know how to fix them.
|
|
|
brewer
Nomad
Posts: 419
Registered: 1-4-2011
Location: BCS
Member Is Offline
Mood: Grateful
|
|
This is the site I go to for answers. A lot of knowledge here. I've heard if the VP44 is starved for fuel, it ruins it That why all 24 valvers
should have a fuel pressure gauge. I have a 12 valve. Love it. Anyways, check this site out.
http://www.cumminsforum.com/
[Edited on 10-14-2012 by brewer]
|
|
|
Desertbull
Senior Nomad
Posts: 558
Registered: 8-27-2003
Member Is Offline
|
|
I have a 98.5 and run 40,000 miles a year up and down the peninsula, my two cents is that it's probably the injector pump with a dead pedal as you
describe. However, all the Dodge Cummins need to have the lift pump replaced immediately when you buy your trucks. If you've ever looked at them you
would know why. Go with an industrial application, http://www.pureflowairdog.com/ and you will be very happy.
Install a fuel pressure gauge to monitor all the time, the injector pump is not an easy bolt on deal for the normal guy trolling down the road.
DREAM IT! PLAN IT! LIVE IT!
|
|
|
vandy
Senior Nomad
Posts: 538
Registered: 10-10-2003
Member Is Offline
|
|
Mexican mechanics are incredible...I would look for an automotive electrician.
Your problem sounds like either a mass air flow sensor (could be just gummed with oil; clean with carb cleaner or starting fluid) or a throttle
position sensor, which I have no experience fixing.
Um, I think I meant "Camshaft position sensor". But the throttle position sensor would fit your symptoms too.
Good Luck!
[Edited on 10-16-2012 by vandy]
|
|
|
![[*]](images/xmbforum/default_icon.gif){kind=icon}
