mtnpop
Senior Nomad
Posts: 597
Registered: 9-8-2009
Location: Colorado/mulege
Member Is Offline
|
|
availability of galv. metal studs??
This may have been asked and answered many times but I could not find it so here it goes...
Has anyone seen galv metal studs 4" or 6" available in any material supply store in BAJA?? some call them drywall studs
Or,, do you have to go to the states and pay the duty to bring em down...
I can find the red metal channel in 4" 6" and 8" locally in Mulege... or Santa Rosalia... a little pricey but may be the way I will have to go...
the red iron works pretty good but best if you can get someone with a good welder...
this should stir up a lot of action...
Common sense is a flower that doesn\'t grow in everyone\'s garden.....
A wise man once spoke nothing.....
Never kick a cow chip on a hot day!!
|
|
|
bajadock
Super Nomad
Posts: 1219
Registered: 12-20-2006
Location: Punta sur de \'Nada
Member Is Offline
|
|
http://www.amsdemexico.com.mx/sucursales.htm
Purchased 6" galv/steel studs for my house in 2007 at the Ensenada AMS store.
I would think there would be distribution available south. If, no, call AMS and negotiate. And please keep us posted on your project.
|
|
|
DENNIS
Platinum Nomad
Posts: 29510
Registered: 9-2-2006
Location: Punta Banda
Member Is Offline
|
|
| Quote: | Originally posted by bajadock
Purchased 6" galv/steel studs for my house in 2007 at the Ensenada AMS store.
|
Home DPO here carries them as well.
"YOU CAN'T LITTER ALUMINUM"
|
|
|
CP
Nomad
Posts: 434
Registered: 7-19-2006
Member Is Offline
|
|
Metalum-Acero on Olachea in La Paz.
|
|
|
bajaguy
Elite Nomad
Posts: 9247
Registered: 9-16-2003
Location: Carson City, NV/Ensenada - Baja Country Club
Member Is Offline
Mood: must be 5 O'clock somewhere in Baja
|
|
Ensenada
Several sources in Ensenada
|
|
|
RnR
Senior Nomad
Posts: 836
Registered: 5-1-2010
Member Is Offline
|
|
Home Depot in La Paz has a lot.
|
|
|
grizzlyfsh95
Nomad
Posts: 226
Registered: 1-8-2010
Location: East Cape
Member Is Offline
|
|
If you go to the EAST cape after a hurricane, you can pick them up for free all over the campo.
The harder I work, the luckier I get
|
|
|
KaceyJ
Nomad
Posts: 391
Registered: 10-7-2011
Location: there
Member Is Offline
|
|
mtmpop,
Are you building in Mulege ? If possible I'd like to see this project when you get it going
A possible lead on the galv studs -- Go see "Alvaro" in San Bruno
He built several metal framed houses there and may be able to point you in the right direction for a supply.
Hope this helps
kc
|
|
|
Justbozo
Nomad
Posts: 139
Registered: 11-20-2012
Location: Lake Michigan/Bahia Concepcion
Member Is Offline
Mood: Got my little stone hut on the bay
|
|
Lumber yard on mex 1near San Bruno turnoff on the west side of road. Don't recall the name, checked my Garmin and I did not have the km#. Newer place
and was impressed with the steel he stocked, but I don't recall steel studs. If you need any quantity he or Pedro Yee at the lumber yard in Mulege
could order for you. I found that local may cost a little more but in the end it is the same as the big stores/cities after all the running. Good
luck!
|
|
|
mtnpop
Senior Nomad
Posts: 597
Registered: 9-8-2009
Location: Colorado/mulege
Member Is Offline
|
|
Your input has been much appreciated.... I have not been into Guerro's supply store at San Bruno this year yet... He used to have the store out at
Chivato which is now closed. His supply of lumber is usually the best in the area....
Having retired from contracting in the high country of Colorado I am in a whole new ballgame now... No snow load,.. etc.... Designing and having
anything built is really taxing my old brain....
Design and communicating same to the local builders sometimes looses much in the translation in the end...
But, we will see what we come up with....
thanks again...
Common sense is a flower that doesn\'t grow in everyone\'s garden.....
A wise man once spoke nothing.....
Never kick a cow chip on a hot day!!
|
|
|
![[*]](images/xmbforum/default_icon.gif){kind=icon}
